Constraints and Welds/manual
From CSI
< Constraints and Welds(Redirected from Constraints and Welds)
CSI Analysis Reference Manual
Introduction
Objects and Elements
Coordinate Systems
Joints and Degrees of Freedom
Constraints and Welds
Material Properties
Frame Element
Frame Hinge Properties
Cable Element
Shell Element
Plane Element
Asolid Element
Solid Element
Link/Support Element-Basic
Link/Support Element-Advanced
Tendon Object
Load Patterns
Load Cases
Modal Analysis
Response-Spectrum Analysis
Linear Time-History Analysis
Geometric Nonlinearity
Nonlinear Static Analysis
Nonlinear Time-History Analysis
Frequency Domain Analyses
Bridge Analysis
References
(e)
Contents |
Overview
Body Constraint
Plane Definition
Diaphragm Constraint
Plate Constraint
Axis Definition
Rod Constraint
Beam Constraint
Equal Constraint
Local Constraint
Welds
Automatic Master Joint
Constraint Output
FAQ
I have two joints that are connected using body constraint. Each of these joints is connected to several elements. When free body diagram is constructed for the set of the two joints, it does not seem to be in equilibrium. Am I missing something?
Open Question (all)
Desired Features
- Graphically display all joints constrained by a selected constraint. Desired Feature (all)
Attachments
- Constraints and Welds (Analysis Reference Manual) (PDF, 0.15 MB)
| Constraints and Welds |
| Overview Rigid behavior |
